Home - Magnetic Conveyors, Transporters, and Automation - Magnetic Slide Conveyors - Considerations and Standard Options

Magnetic Slide Conveyors - Beltless

Request Quote

Considerations & Standard Options



Standard Options

Drive Mounting Options

Standard Conveyor Leg Supports

Reverse Hopper Options

Motor Control Options

Standard Options


Everything you’ll need to make your Material Handling, Automation and Industrial applications as efficient as possible.


Whether your need is to convey heavy parts, flat oily cutouts, small screws or curled chips, Storch Magnetic Slide Conveyors can be equipped for efficient operation under the toughest conditions.

Our list of options includes a wide array of slider plate materials, all fabricated from #300 Series stainless steel. Depending upon the application, slider plates will range from 16 gauge for light duty chip handling to 7 gauge for heavy service parts handling. In addition, a textured surface plate is available (in 16, 14 and 12 gauge thicknesses) which not only provides added strength but also eliminates the oil-film cohesion of flat stampings. We also offer a combination of the two surfaces and a removable, replaceable impact sheet for the input area of the conveyor, to increase the life of the base slider plate.

Motor controls range from simple manual on/off single phase switches to 460 volt 3 phase fused magnetic motor starters plus controls for variable speed conveyors.

Standard Leg Supports ar
e height adjustable and removeable. Casters are optional for easy moves. Standard finish is an enamel paint with options for customer-specified finishes. A reverse flow hopper for the input area of conveyors is available. It aids in effective removal of most chips and ferrous contaminant from the coolant, increasing useful life of the liquid and saving wear and tear on pumps and machine ways.


Leak Test of Conveyors




Drive Mounting Options


Standard shaft mounted drive arrangements are shown. Optional top mounted drive with chain drive and safety clutch can be provided. Conveyors that require a motor 1 HP and larger will be provided with top mounted gear motor, roller chain, and safety clutch.





Standard Conveyor Leg Supports

  • Standard Conveyor Leg Support

  • +/- 3" Height Adjustable

  • Removable by loosening 4 hex nuts

  • Anchor Holes

  • Laser Cut



Reverse Hopper Options

Flow chart assumes the following:

  • Water Soluble Coolant

  • Top of hopper is 2" above coolant level

  • Constant Coolant Flow

  • Minimum 24" Long Weir Plate

Coolant Capacity in Gallons / Minute


Cast Iron




Motor Control Options

Manual motor starter with thermal overloads for 110 V, Single-Phase, 60 Hz for up to 1 HP

Non-reversing manual motor starter with overload relay size “0”, NEMA 12 enclosure to 3 HP @ 230 V, or 5 HP @ 460 V, 3-Phase, 60 Hz.



Combination magnetic motor starter
- fused disconnect - size 1 NEMA 12 JIC
non-reversing, start/stop pushbuttons, pilot light and 110 V transformer for 230 or 460 V, 3-Phase, 60 Hz.



Tell us how we may help!
For Information or Quote, contact us by:
Toll Free: (800) 959.0047

Phone: (734) 591.2200
Fax: (734) 591.2582
Email: conveyors@storchmagnetics.com

Submit a Request for Quote



Storch Magnetics: Magnetic Solutions for Increasing Productivity Since 1952.

11827 Globe Road, Livonia, Michigan 48150
 Toll Free: (800) 959.0047   Phone: (734) 591.2200   Fax: (734) 591.2582

Industry Type

Machining & Grinding Industry Equipment
Metal Stamping Industry Equipment

Magnets and Magnet Assemblies

Permanent Holding Magnets and Assemblies

Ceramic Magnets

Alnico Magnets

Rare Earth–High Strength Magnets

Magnetic Materials
Rare Earth-Neodymium, High Energy Magnets

Rare Earth-Samarium Cobalt Magnets

Ceramic Magnets

Alnico Magnets

Flexible Magnets

Custom Engineered Magnets
Blueprint Holders and Office Hardware

Magnetic Sweepers, Lifts and Tools

Magnetic Sweepers

Manual Push

Vehicle/Truck Mounted

Tow Behind

Vehicle Suspended

Skid Steer / Hi-Lo

Special / Custom

Magnetic Lifts


Electro Battery Operated


Magnetic Tools

Magnetic Pickers & Retrieval Tools

Magnetic Paws

Press Feeders and Transfers

Tank Cleaners

Magnetic Ground

Magnetic Positioners/Work Holders


Electromagnets and Demagnetizers


Round Electromagnets

Rectangular Electromagnets

Bipolar Electromagnets

DC Power Supplies


Magnetic Conveyors, Transporters, and Automation

Magnetic Slide Conveyors

Beltless Magnetic Conveyor Features

Considerations and Standard Options

2 ¾" to 5" Profiles

8" to 11" Profiles

Steel Hinge Belt Conveyors

Drag & Chain Conveyors

Magnetic Conveyor Belts

Vibratory Feeder Conveyors - Transporters

Sheet Handling Conveyors & Components

Magnetic Rails and Rollers

Custom Automation / Systems Integration

Magnetic Separators - Filter Solutions

Coolant Filters

Powder, Bulk & Solid Magnets

Plate Magnets and Crossbelts

Magnetic Drum Separators

Overhead Magnetic Belt Separators

Magnetic Pulley and Magnetic Separator Conveyors

Inline Magnets - Hump - Elbow - Pneumatic

Gravity Flow Magnet Separators

Tube Magnets

Grate Magnets, Magnetic Drawers

Sheet Separators (Fanners)

Laser Cutting - Sheet Metal Fabrication

Precision Laser Cutting Capabilities

Sheet Metal Fabrication / Forming / Painting / Finishing

Laser Cut Fabricated Products

Storch Magnetics Information

Company History

Company News

Capabilities and Contract Manufacturing Services

Representative and Distributor Requests

Give Us Feedback

Employment Opportunities

Glossary of Terms

Request Literature
Terms and Conditions